Main Features:

*Recommend use PV panels:300W/Vmp>34V/Voc<50V                

*Max input voltage:50V                                                          

*Peak power tracking voltage:25V-40V                          

*Operation voltage range:17V-50V                                           

*MIN/MAX start voltage:22V-50V                                              

*MAX input current:9.8A

*Output AC voltage:90V-140/180~260VAC                                 

* Rated Output Power:230W 

* Wave Form:Pure Sine Wave                                                   

* System Operation:APL/MPPT                                                 

*Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

* Installation:Waterproof IP65 ,outdoor Type Design

System Function:

1,Power line carrier-current communication(Only used in WVC series)

2, 6-grade power search

3,Operation voltage range:17V-50V   

4,High-frequency two-way and one-way grid function

5,Kinds of frequency output function.

6,Directly connected to the solar panels (do not need to connect the battery)

7,AC 0 angle with high precision auto-detection

8,Synchronous High-frequency Modulation

9,Pure Sine Wave Output

10,Automatic Sensing Function Solar Luminosity

11,Power Automatically Locked (APL)

12,Automatically Adapt To Different Load Power Factor 

13,Constant Current, Constant Power

14,Automatically Shut Down When The Power Grid Fault

15,Stack Multiple Machines

16,High-Frequency High Conversion Rate 

17,Maximum Power Point Tracking (MPPT)

System function:

 Power line carrier-current communication

 6-grade power search

 Wide voltage input(22-60VDC)

 High-frequency two-way and one-way grid function

 Kinds of frequency output function.

 Directly connected to the solar panels (do not need to connect the battery)

 AC 0 angle with high precision auto-detection

Synchronous High-frequency Modulation

Pure Sine Wave Output

Automatic Sensing Function Solar Luminosity

Power Automatically Locked (APL)

Automatically Adapt To Different Load Power Factor 

Constant Current, Constant Power

Automatically Shut Down When The Power Grid Fault

Stack Multiple Machines

High-Frequency High Conversion Rate 

Maximum Power Point Tracking (MPPT)

Stack using

 In order to achieve higher power use requirements, this product can be stacked. Such as: 4 micro inverter of 260W stacking can achieve 1040W. And the number of the stacking is unlimited.    

LED display

Finished all the connections, confirm the AC and DC connection is right. The LED is red when the AC power is unconnected and the LED shows like below when the AC power is connected.  The LED shows like below:

A) Power failure display

LED in red:

1. Power cut off

2. Output failure

3. Power grid fault

4. DC low- voltage display(protection)

5. DC over-voltage display(protection)

6. Over temperature display(protection)

B) Power adjust display

1.LED in green, but flashing, it means power is in adjusting condition.

2.LED in green and steady, it means the power is locked, and the inverter works.

System recommend : 
Residential / Business systems and power plants rooftops, grounds,hills and anywhere in the sun with micro inverters, Outdoor type design IP65, mounting on the brackets saving more money,Reduced design costs & Lower installation cost of energy;

Applications:

The solar power system is to make electricity for TV,Washing machine, Refrightor, Microwave oven,Lights, Air conditioners etc., and the extra solar power electric will be automatically uploaded to the utility grid with allowance paid by local gorvernment if the policy suppots.

Notice: When you order, please comform SOLAR grid tie inverter's voltage and frequency. 

            If not specify, we will send the solar inverter as same as in the title.

Return:
1.Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
2.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
3.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
4.If the item is found non-defective, the item will be sent back to the buyer at buyer?s expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.

Kind Note: 

Don't leave Negative feedback without asking us for help. Please contact us first if you have any problem.
We strive to answer all messages as quickly as possible.
Thank you in advance for your patience.