Feature:
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)

Input and output

1\DC input

* Input voltage range: 10.5V to 28V.

* Solar Panel: recommend the use of power greater than 30W, the standard voltage 17.5V PV panels.

* Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range.

* Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC.

2\AC output:

* Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz

* Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz

LED Indicator:

1\Red LED:

* Low-voltage protection (input DC voltage is less than 10.5VDC).

* Overvoltage protection (Input DC voltage is greater than 28.5VDC).

* Over-temperature protection (when the chassis temperature is above 75 ℃,

the temperature dropped about 2-10 minutes to restart automatically after cooling).

* Fault Protection (when 110VAC or 220VAC power outage or shutdown).

* Islanding protection: electricity disconnected, the inverter automatically shut down output.

2\Green LED:

* Green LED flashing: are adjusting power output, MPPT is working condition.

* Long bright green LED: Indicates the maximum inverter output power is in the locked state of work.

Notes                                                               

---Non-professionals do not disassemble, Only qualified personnel may repair this product.

---Please inverter installed in the low humidity and well-ventilated place to avoid the inverter

overheating, and clear around the inflammable and explosive materials.

---When using this product, avoid touching children, playing, to avoid electric shock.

---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the

cable size.

---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter

DC voltage drop caused by wear and tear.

---Connected to a power outlet to provide AC.

---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump.